FRITZ!Box (Telephony, setup, FRITZ!OS 7.10 and later)
Models: 7590, 7560, 7530, 7490, 7460, 7430
Firmware: FRITZ!OS 7.10 and higher
Manufacturer's website: avm.de
We recommend to always use the latest firmware. How do I know, which firmware version I've got?
Instructions for older firmwares can be found at the bottom of this article.
Important note: This guide is for phone numbers and cloud accounts. If you want to set up a block of numbers as a SIP trunk, then you can find the correct instructions here. If you want to set up the Cloud Telefonanlage, then you can find the right instructions here.
Signing in to the FRITZ!Box
- Make sure that the FRITZ!Box is connected to the Internet and to your computer.
- Type "fritz.box" in the address bar of your browser. If you have trouble reaching the site please have a look at these hints on how to access the user interface.
- If you have set a password, enter it and then click „Log In“.
- These instructions assume that you have set the language to english via System > Region and Language.
Setting up the phone number
- Open the menu Telephony > Phone Numbers, switch to the tab "Phone numbers".
- Click on the button "New Telephone Number".
- If you are asked whether you want to enter an "Internet Phone Number" or "Landline Phone Number", choose "Internet Phone Number". Click the "Next" button afterwards.
- In the next screen, please select the following:
- Telephony provider: easybell
- Internet Telephone Number: Your telephone number in international format (0049 (already predefined) + area code without zero + phonenumber).
- User name:Your telephone number in international format (0049 + area code without zero + phonenumber).
- Password:Your SIP-password (You may find it in your Customer Portal under Phone settings / Manage numbers)
- Enter your area code: You will only see this option during the initial setup of the FRITZ!Box. Enter your area code with the leading 0 here, e.g. 030 for Berlin.
- Click on " Additional Settings"
- Please fill in "Additional Settings" as follows:
- Always register via an internet connection: No
- Contact internet telephony provider via: IPv4 and IPv6, IPv6 preferred (You will see this option only if your Internet connection supports IPv6.)
- Enable encrypted telephony: If you wish, you can encrypt the telephony here. Read further information in our article on encrypted telephony.
- Please click "Next" when you are done
- On the following page you can review your settings. Click "Next" to complete the setup.
If everything has been entered correctly and your box is connected to the Internet, you should now be able to make calls. If this is your first set up number, all calls in the future will be made via this number. Please remember to configure your telephones according to your wishes in the menu item Telephony > Telephony Devices.
Setting up/changing the Line Settings
Setting up or changing the line settings is only necessary if you want to change your prefix settings at a later date or if you want to fax with the FRITZ!Box or a connected fax machine.
- Click "View: Advanced" in the left menu at the very bottom (located after "Wizards"). If you are in the advanced view, please click:
- In the left menu "Telephony" click on "Telephone Numbers".
- Switch to the "Line Settings" tab.
- Select Germany under "Country".
- For "Country code", enter the prefix 00 in the first field and the country code 49 in the second field.
- For "Area code" enter the prefix into the first field and the area code into the second field (e.g. for Berlin "0" and "30").
- In "Telephony Connection", please unfold "Change connection settings" by clicking on it.
- There, uncheck "Fax transmission using T.38".
- Afterwards please click on Apply.